How To Load A Grease Gun

1.24.2021

How To Load A Grease Gun

Amazing tips for loading a grease gun. How to properly load a grease cartridge into a grease gun.

Pin On Top 10 Best Cordless And Electric Grease Guns Reviews

Prevent air locks by filling the grease gun head before adding the new cartridge Photo 1.

How to load a grease gun. Remove old cartridge and reset spring. Many people have trouble loading cartridge grease guns. Before screwing the cap back onto the housing make sure that any grease that may have seeped from cartridge whilst opening is wiped away.

The LX-1152 is the grease gun shown in the video. The head of the grease gun is where youll find the hose and the grip. Then back it off two turns and release the spring tension.

Screw gradually and unfasten the bar. How to load a grease gun. It is important that you pull back the T handle which connects to a spring loaded rod and latch it into place.

Then unscrew the grease gun head and put the cartridge right into the guns barrel. The model is the. If you have a problem in knowing how to load a grease gun cartridge gently pull the handle and latch it properly.

Fasten the cap by screwing it until almost tight. First unscrew the end cap from the grease gun and remove the empty cartridge. This is how to replace grease in a grease gun va the tube style.

If there is air trapped inside unscrew to allow air out. Install the end cap and retract the spring by pulling the plunger-rod handle and twisting and locking it in place. Insert the new cartridge and screw on the barrel until it seats against the head.

It holds a 14 oz. Scoop any remaining grease out of the old cartridge and pack it into the head. I had an older model grease gun that needed refilling since I couldnt find a how to online I made my own for others in the same situation.

Load new grease cartridge. Depress the hand back in the tank to prevent sucking the lubricant into the grease gun. Unscrew the body of the grease gun.

Insert the new cartridge into the grease gun and remove the seal with the pull ring. This is how to replace grease in a grease gun va the tube style. Leave about 2-3 turns from completely tight to allow air to escape.

Unscrew the head of the grease gun break the seal and insert the cartridge into the barrel assembly.

Pin On Baby